solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / sum __ __ __ screening 2 / __ = not screened tx = tx level txv = txv s = s level package type __ = axial leaded sms = surface mount square tab voltage/family 60f = 6,000v 70f = 7,000v 80f = 8,000v 90f = 9,000v SUM60F thru sum90f and SUM60Fsms thru sum 9 0fsms 500 ma 6,000 thru 9,000 volts 180 ns fast recovery rectifier features: ? piv to 9,000 volts ? hermetically sealed axial and square tab surface mount package ? fast recovery 180 nsec maximum 4 / ? void free construction ? metallurgically bonded ? 175 c maximum operati ng temperature ? tx, txv, and s-level screening available 2 / ? also available in ultra fast versions, consult factory maximum ratings 3 / 6 / rating symbol value unit peak inverse voltage SUM60F and SUM60Fsms sum70f and sum70fsms sum80f and sum80fsms sum90f and sum90fsms piv 6000 7000 8000 9000 volts average rectified current t a = 25 c t a = 100 c i o1 i o2 500 300 ma surge current (1 cycle) i fsm 25 amps operating & storage temperature 5 / t j and t stg -65 to +175 c notes: 1 / for ordering information, price, operating curves, and availability- contact factory. 2 / screening based on mil-prf-19500. scr eening flow available on request. 3 / unless otherwise specified, all electrical characteristics @25oc. 4 / i f = 500ma, i r = 1a, i rr = 250ma, t a = 25 c 5 / maximum lead/end temperature for soldering is 250 c, 3/8? from case for 5 sec. maximum. axial leaded sms 6 / operating and testing over 10,000 v/inch may require encapsulation or immersi on in suitable dielectric material. note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0037d doc
solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 s sdi@ssdi-power.com * www.ssdi-power.com SUM60F thru sum90f and SUM60Fsms thru sum90fsms electrical characteristics 3 / 6 / characteristics symbol value unit maximum forward voltage ( 300 s pulse minimum) i f = 500 ma v f 13.5 vdc maximum reverse leakage current (v r = rated) (t a = +25 c) (t a =+100 c) i r1 i r2 1.0 15 a a maximum junction capacitance v r = 100 vdc, f = 1mhz c j 8 pf maximum reverse recovery time i f = 500ma, i r = 1a, i rr = 250ma, t a = 25 c t rr 180 ns typical thermal impedance junction to lead for axial, l =.375" junction to end tab for surface mount r jl r je 18 18 c/w package outlines : dimensions (inches) dimensions (inches) dim. minimum maximum dim. minimum maximum a .065 .165 a .170 .180 b --- .350 b .330 .380 c .047 .053 c .020 .030 d 1.00 --- d .002 --- axial sms note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0037d doc
|
